"Traces come off the board when etching."

If you ever have any pieces of the transferred toner image to come off the board during the etching process it means the toner did not fully fuse to the copper board back in "Step 1". Readdress your transfering technique. Properly fused toner should be able to withstand fingernails scraped over the traces with the only damage being a "dented" leading edge where the nail first hit the trace.

 

RETURN

 

If you don't find the answer to the problem you're having, please call us right away! We're here to get your problem resolved immediately!

Our hours of operation are from 9am to 5pm, Eastern Standard Time. Call (850) 926-2009. You can also email us at mail@pulsarprofx.com. If we are closed, leave us a quick email when you'd like us to call you back the next morning. Also tell us what TIME ZONE you are in so we don't call too early.